标准动态

首页 > 新闻动态 > 标准动态

塑料力学性能测试标准

发布时间:2016-11-12   浏览量:2800次

   GB/T 1039-1992塑料力学性能试验方法总则
  Plastics--General rules for the test method of mechannlcal properties

  GB1040 塑料拉伸试验方法
  Plastics--Determination of tensile properties

  GB/T_1041-1992 塑料压缩性能试验方法

  Plastics--Determination of compressive properties

  GB/T 1043-93 硬质塑料简支梁冲击试验方法
  Plastics--Determination of charpy impact strength of rigid matericals

  GB/T 14153-1993硬质塑料落锤冲击试验方法通则
  General test method for impact resistance of rigid plastics by means of falling weight

  GB/T 14484-1993 塑料承载强度试验方法
  Test method for bearing strength of plastics

  GB/T 14485-1993 工程塑料硬质塑料板材及塑料件耐冲击性能试验方法、落球法
  Standard methods of testing for impact resistance of plats and pats made from englneering plastics by a ball(falling ball

  GB/T 15047-1994 塑料扭转刚性试验方法
  Test method for stiffness proporties in tirsion of plastics

  GB/T 15048-1994 硬质泡沫塑料压缩蠕变试验方法
  Cellular plastics,rigid--Determination of compressive creep

  GB/T 12027-2004 塑料-薄膜和薄片-加热尺寸变化率试验方法
  Plastics--film and sheeting-Determination of dimensional change on heating

  GB/T 2013525-1992 塑料拉伸冲击性能试验方法
  Test method for tensile-impact property of plastics

  GB/T 11999-1989塑料薄膜和薄片耐撕裂性试验方法埃莱门多夫法
  Plastics--Film and sheeting--Determination of tear resistance--Elmendorf method

  GB/T 10808-1989 软质泡沫塑料撕裂性能试验方法
  Cellular plastics--Tear resistance test for flexible materials

  GB/T 11546-1989 料拉伸蠕变测定方法
  Plastics--Determination of tensile creep

  GB/T 11548-1989 硬质塑料板材耐冲击性能试验方法 (落锤法)
  Standard test method for impact rest resistance of rigid plastics sheeting by means of a tup(falling werght

  GB 9641 硬质泡沫塑料拉伸性能试验方法
  Test method for tensile properties of rigid cellular plastics

  GB/T 9647-1988 塑料管材耐外负荷试验方法
  Test method for external loading resistance for plastics plpes

  GB 10006-88 塑料薄膜和薄片摩擦系数测定方法
  Plastics--Film and sheeting--Determination of the coefficients of friction

  GB 8812-1988 硬质泡沫塑料弯曲试验方法
  Test method for beuding of rigid cellular plastics

  GB 8813-1988 硬质泡沫塑料压缩试验方法
  Test method for compression of rigid cellular plastics\

  GB/T 9341-2000 塑料弯曲性能试验方法
  Plastics--Determination of flexural properties

  GB/T 8805-1988 硬质塑料管材弯曲度测量方法
  Determination of deflection for rigid plastics pipes

  GB/T 8324-1987 模塑料体积系数试验方法
  The methd for bulk factor of moulding materials

  GB/T 6671-2001热塑性塑料管材纵向回缩率的测定

  GB 6344 软质泡沫聚合物材料拉伸强度和断裂伸长率的测定
  Polymeric materials,cellular flexible--Determination of ensile strength and elongation at break

  GB/T 5478-2008 塑料滚动磨损试验方法
  Plastics--Test method for wear by rolling

  GB-T 3960-1983塑料滑动摩擦磨损试验方法
  Test method for friction and wear of plastics by sliding

  GB 3354-1999定向纤维增强塑料拉伸性能试验方法
  The method for tensile properties of oriented fiber reinforced plastics

  GB 3355-2005纤维增强塑料纵横剪切试验方法
  Test method for longitudinal transverse shear (L-T shear) properties of fiber reinforced plastics 

  GB 3356-1999 单向纤维增强塑料弯曲性能试验方法
  Test method for flexural properties of unidirectional fiber reinforced plastics

  GB/T 1843-1996 塑料悬臂梁冲击试验方法
  Plastic--Determination of lzod impact strength

  GB-T 15598-1995 塑料剪切强度试验方法穿孔法
  Testing method for shear strength of plastics by punch tool

相关新闻